| It's
like the soles of your work boot... it's sprayed onto your truck
bed up to 1/4" thick.
LINE-X is a two part polyurethane elastomer system. It uses equal parts of an "A" component or hardener and a "B" component or resin. When combined properly it produces a polyurethane elastomer similar to the bottoms of your work boot. The two liquid components are brought together (using special equipment) at the tip of the spray gun. LINE-X cures or "sets up" in 3 to 5 seconds, giving it an immediate set time.
Adds Value to New & Older Trucks A LINE-X
bed liner is a great way to add resale value, whether you
spray it on a well used or a new truck bed. According to
the NADA* "Official Used Car Appraisal Guide"
a LINE-X bedliner adds $225 in trade-in value to your truck. The skid resistant LINE-X surface helps to hold loads in place. Plus, it won't tear or rip like other "soft" spray on bedliners. |
1. On a clean, dry truck the bed is masked as if it is to be painted.
2. The entire truck is covered to protect from overspray.
3. The bed is wiped with a grease and wax remover, scuffed...and it's spray time!
4.
Sprayed on, it dries in 3-5 seconds. It's
5. Immediately after spraying, the truck is unmasked.
From start to finish it took less than 2 hours to complete the job. The truck is ready for use immediately - even in the rain or cold, without affecting the bed liner. We recommend 24 hours "set time" before placing heavy object on the bed. |
LINE-X
exhibits the highest tensile strength, the highest tear strength,
and the highest abrasion resistance than any other spray-in
liner
|
|||
  |
